6.2.2.4 Packet Tracer – Configuring Trunks
Packet Tracer 6.2.4 Configure Etherchannel
6.2.2.4 Packet Tracer – Configuring Trunks Packet Tracer – Configuring Trunks (Answer Version) Answer Note: Red font color or Gray highlights indicate text that appears in the Answer copy only. Topology Addressing Table Device Interface IP Address Subnet Mask Switch Port VLAN PC1 NIC 172.17.10.21 255.255.255.0 S2 F0/11 10 PC2 NIC 172.17.20. Completed PDF/DOC 6.2.2.4 IPv4 Static & Default Routes This packet tracer is the first packet tracer for Chapter 6, which is static routing. Below are the commands if you don't want to download. 6.2.2.4 Packet Tracer – Configuring Trunks Packet Tracer – Configuring Trunks (Answer Version) Answer Note: Red font color or Gray highlights indicate text that appears in the Answer copy only. Topology Addressing Table Device Interface IP Address Subnet Mask Switch Port VLAN PC1 NIC 172.17.10.21 255.255.255.0 S2 F0/11 10 PC2 NIC 172.17.20. 6.2.2.4 Packet Tracer - Configuring Trunks Instructions Answers. 6.2.3.8 Packet Tracer - Troubleshooting a VLAN Implementation - Scenario 2 Instructions Answers. Related Articles. 1.1.2.9 Packet Tracer – Documenting the Network Instructions Answers.
From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to 'Online Test' link below.
Version 5.02 | Version 5.03 | Version 6.0 | Online Assessment |
Chapter 6 Exam | Chapter 6 Exam | Chapter 6 Exam | Online Test |
Next Chapter | |||
Chapter 7 Exam | Chapter 7 Exam | Chapter 7 Exam | Online Test |
Lab Activities | |||
6.1.1.5 Packet Tracer – Who Hears the Broadcast | |||
6.1.2.7 Packet Tracer – Investigating a VLAN Implementation | |||
6.2.1.7 Packet Tracer – Configuring VLANs | |||
6.2.2.4 Packet Tracer – Configuring Trunks | |||
6.2.3.7 Packet Tracer – Troubleshooting a VLAN Implementation – Scenario 1 | |||
6.2.3.8 Packet Tracer – Troubleshooting a VLAN Implementation – Scenario 2 | |||
6.3.3.6 Packet Tracer – Configuring Router-on-a-Stick Inter-VLAN Routing | |||
6.3.3.8 Packet Tracer – Inter-VLAN Routing Challenge | |||
6.4.1.2 Packet Tracer – Skills Integration Challenge |
Packet Tracer – Configuring Trunks (Answer Version)
Answer Note: Red font color or Gray highlights indicate text that appears in the Answer copy only.
Topology
Addressing Table
Device | Interface | IP Address | Subnet Mask | Switch Port | VLAN |
PC1 | NIC | 172.17.10.21 | 255.255.255.0 | S2 F0/11 | 10 |
PC2 | NIC | 172.17.20.22 | 255.255.255.0 | S2 F0/18 | 20 |
PC3 | NIC | 172.17.30.23 | 255.255.255.0 | S2 F0/6 | 30 |
PC4 | NIC | 172.17.10.24 | 255.255.255.0 | S3 F0/11 | 10 |
PC5 | NIC | 172.17.20.25 | 255.255.255.0 | S3 F0/18 | 20 |
PC6 | NIC | 172.17.30.26 | 255.255.255.0 | S3 F0/6 | 30 |
Objectives
Part 1: Verify VLANs
Part 2: Configure Trunks
Background
Trunks are required to pass VLAN information between switches. A port on a switch is either an access port or a trunk port. Access ports carry traffic from a specific VLAN assigned to the port. A trunk port by default is a member of all VLANs; therefore, it carries traffic for all VLANs. This activity focuses on creating trunk ports, and assigning them to a native VLAN other than the default.
Part 1: Verify VLANs
Step 1: Display the current VLANs.
- On S1, issue the command that will display all VLANs configured. There should be ten VLANs in total. Notice how all 24 access ports on the switch are assigned to VLAN 1.
- On S2 and S3, display and verify all the VLANs are configured and assigned to the correct switch ports according to the Addressing Table.
6.2 2.4 Packet Tracer Configuring Trunks Answers
Step 2: Verify loss of connectivity between PCs on the same network.
Although PC1 and PC4 are on the same network, they cannot ping one another. This is because the ports connecting the switches are assigned to VLAN 1 by default. In order to provide connectivity between the PCs on the same network and VLAN, trunks must be configured.
Remove the Gevey Pro and the Sim card; 3.Just insert the mobile SIM card into iPhone,Wait for it to show the required activation. When it shows fake signal points and LTE, active roaming mobile data until it shows invalid sim; 5. Turn off the iPhone completely; 6. Take out the mobile sim, insert the Gevey Pro with the Simcard on the. Gevey sim unlock sprint iphone 5.
Olympus ix50 manual. Olympus IX50 IX70 Inverted Microscope Manual. Recommend Documents. No documents. Olympus IX50 IX70 Inverted Microscope Manual. Download PDF. 79 downloads 141 Views. Manuals and User Guides for Olympus IX51. We have 1 Olympus IX51 manual available for free PDF download: Instructions Manual Olympus IX51 Instructions Manual (76 pages). Page 1 BX51 SYSTEM MICROSCOPE This instruction manual is for the Olympus System Microscopes Models BX51 and BX52. To ensure the safety, obtain optimum performance and to familiarize yourself fully with the use of this micro- scope, we recommend that you study this manual thoroughly before operating the microscope.
Part 2: Configure Trunks
Step 1: Configure trunking on S1 and use VLAN 99 as the native VLAN.
- Configure G0/1 and G0/2 interfaces on S1 for trunking.
- S1(config)# interface range g0/1 – 2
- S1(config-if)# switchport mode trunk
- Configure VLAN 99 as the native VLAN for G0/1 and G0/2 interfaces on S1.
- S1(config-if)# switchport trunk native vlan 99
- The trunk port takes about a minute to become active due to Spanning Tree. Click Fast Forward Time to speed the process. After the ports become active, you will periodically receive the following syslog messages:
- %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on GigabitEthernet0/2 (99), with S3 GigabitEthernet0/2 (1).
- %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on GigabitEthernet0/1 (99), with S2 GigabitEthernet0/1 (1).
- You configured VLAN 99 as the native VLAN on S1. However, S2 and S3 are using VLAN 1 as the default native VLAN as indicated by the syslog message.
- Although you have a native VLAN mismatch, pings between PCs on the same VLAN are now successful. Why? Pings are successful because trunking has been enabled on S1. Dynamic Trunking Protocol (DTP) has automatically negotiated the other side of the trunk links. In this case, S2 and S3 have now automatically configured the ports attached to S1 as trunking ports.
Step 2: Verify trunking is enabled on S2 and S3.
On S2 and S3, issue the show interface trunk command to confirm that DTP has successfully negotiated trunking with S1 on S2 and S3. The output also displays information about the trunk interfaces on S2 and S3.
Which active VLANs are allowed to cross the trunk? 1, 10, 20, 30, and 99.
Step 3: Correct the native VLAN mismatch on S2 and S3.
- Configure VLAN 99 as the native VLAN for the appropriate interfaces on S2 and S3.
- Issue show interface trunk command to verify the correct native VLAN configuration.
Step 4: Verify configurations on S2 and S3.
- Issue the show interface interface switchport command to verify that the native VLAN is now 99.
- Use the show vlan command to display information regarding configured VLANs. Why is port G0/1 on S2 no longer assigned to VLAN 1? Port G0/1 is a trunk port and trunks ports are not displayed.
From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to 'Online Test' link below.
3.4.5 Packet Tracer Configure Trunks
Version 5.02 | Version 5.03 | Version 6.0 | Online Assessment |
Chapter 6 Exam | Chapter 6 Exam | Chapter 6 Exam | Online Test |
Next Chapter | |||
Chapter 7 Exam | Chapter 7 Exam | Chapter 7 Exam | Online Test |
Lab Activities | |||
6.1.1.5 Packet Tracer – Who Hears the Broadcast | |||
6.1.2.7 Packet Tracer – Investigating a VLAN Implementation | |||
6.2.1.7 Packet Tracer – Configuring VLANs | |||
6.2.2.4 Packet Tracer – Configuring Trunks | |||
6.2.3.7 Packet Tracer – Troubleshooting a VLAN Implementation – Scenario 1 | |||
6.2.3.8 Packet Tracer – Troubleshooting a VLAN Implementation – Scenario 2 | |||
6.3.3.6 Packet Tracer – Configuring Router-on-a-Stick Inter-VLAN Routing | |||
6.3.3.8 Packet Tracer – Inter-VLAN Routing Challenge | |||
6.4.1.2 Packet Tracer – Skills Integration Challenge |
Suggested Scoring Rubric
Packet Tracer 6.2.2.4 Answers
Packet Tracer scores 80 points. The three questions in Step 1, 2 and 4 are worth 20 points.